Vertiv Liqui-tect LP6000, Installer/User Manual

Page: 56 / 82

Backing Up Configuration Settings
Once you have adjusted the configuration of the LP6000, save a back-up configuration file to a safe
place. The configuration file can be used to restore the system and to copy to other LP6000 units.
All parameters, including x-y coordinates for the interactive reference map are saved. Only the map image
file is not saved in the configuration file. See
Saving a Map Image on page 45 to back up the map image.
To back up configuration settings:
1. Select
Configuration
>
System/Flash Management
.
System/Flash Management on page 55 opens.
2. Click
Download Configuration File (.cfg)
.
The file is downloaded.
3. Save the downloaded file to a computer or USB drive.
• If necessary, update the file name with a descriptive name for your configuration.
• Do not change the file extension, .cfg. If the extension is changed, the file is not
recognized when you attempt to upload.
Restoring Factory Default Settings
Use the Bootloader to restore the factory-default configuration.
1. Save a back-up copy of the current settings in case you must re-load them. See Backing Up
Configuration Settings on page 56.
2. Select
Configuration
>
System/Flash Management
.
System/Flash Management on page 55 opens.
3. Click
Exit to Bootloader.
The Bootloader opens in the web browser.
4. Click
Restore Factory Defaults
.
The settings are restored to defaults.
5. Click
Start Application
to restart and return to the web interface.
Restoring Back-up Configuration Settings
1. Select
Configuration
>
System/Flash Management
.
System/Flash Management on page 55 opens.
2. Click
Choose File
and browse to select the configuration (.cfg), then click
Upload
.
The configuration uploaded, and the web interface opens when the update is complete.
Vertiv | Liqui-tect LP6000 Installer/User Guide | 56