Vertiv Liqui-tect LP6000, Installer/User Manual

Page: 40 / 82

5.3.4 Slave Zone Settings
If slave controllers are configured, use Slave Zones to configure the zones for the slaved controllers.
NOTE: Label and configuration options depend on the type of device connected. Some fields may be
read-only.
If no slaved controllers are configured, selecting Slave Zones re-directs you to the Configuration menu.
NOTE: Make sure that the correct slave controller is selected. Use the
Jump to controller
drop-down at
the top-right to change the slave controller displayed.
FIELD DESCRIPTION
Virtual Zone # Number designating the zone.
Label Descriptive label for the zone. 30-character limit.
End Distance
Distance on the leak-detection cable at the end of the zone. Zone #1 always starts at 0 (zero), and the end of the
zone is designated by distance from start. The each subsequent zone starts at the End Distance of the previous
zone.
Table 7.5 Slave Controller Zone Configuration fields and options
5.3.5 Network/IP Settings
The Network Settings/IP Configuration page displays the device's MAC address and configures the
network communication settings for the web UI.
CAUTION: Incorrect network settings will make the web UI inaccessible. Consult with your
IT/network administrator before making any changes.
Vertiv | Liqui-tect LP6000 Installer/User Guide | 40