Mechanical Installation
17
2.7.3. Removing Leveling Feet and Fixing Cabinet
To avoid personal injury and damage to the unit, the operation should be performed by two trained
professional.
ITEMS
DESCRIPTION
ITEMS DESCRIPTION
1
Front top fixing hole
3
Front bottom fixing hole
2
Rare top fixing hole
4
Rare bottom fixing hole
Figure 2-11 Cabinet Fixing Holes
• Remove the Leveling Feet
1. Use an adjustable wrench to loosen the fastening nuts on the 4 hexagonal bolts in turn clockwise.
2. Turn the hexagonal bolt at the bottom of the leveling foot clockwise until the foot falls off the cabinet frame.
• Fix the Cabinet
There are two holes on each side of the top, bottom, front, and rear, as shown in
. Four bottom holes are bolted to
the floor bracket in the equipment room (front fixing holes at the bottom of the cabinet are symmetrical to the rear fixing
holes, and only the front fixing holes are shown in the figure). The four holes at the top can be connected to the top bracket
of the room after they are installed with bolts.
