Vertiv Liebert IntelliSlot Unity Card Installer And User Manual Download Page 66 | Manualshive

Page: 66 / 74

background image

Link Local

Presently used IPv6 Link Local Address

IPv6 Default Gateway

Presently used IPv6 network address of the gateway for network traffic destined for other networks
or subnets

Primary DNS Server

IPv6 Primary DNS

Secondary DNS Server

Presently used IPv6 Secondary DNS

Last DHCPv6

Last known IPv6 address assigned by DHCPv6

Last DHCPv6 Lease

Lease time of last known DHCPv6 address

6.7.2 Firmware Update Folder

The Unity card has two areas in flash memory for the firmware and the configuration. One area currently
operates on the card. The other area is the previous firmware on the card and is considered to be an
alternate image.

The folder supports updating the firmware of the Unity card or reverting to a previous version. If the
firmware has not been updated, then the previous version/configuration is not available to revert.

NOTE: If downgrading firmware to a previous version, a reset to factory defaults occurs if there are
feature in the current version that are not present in the older version. However, if downgrading using
an alternate image, no reset occurs.

Firmware Update settings

Current Firmware Version

The version of the firmware running on the card

Current Firmware Label

The label of the firmware running on the card

Current Firmware Date

The build date of the firmware running on the card

Alternate Firmware Version

The version of the alternate (previous) firmware

Vertiv™ | Liebert® IntelliSlot Unity Card Installer/User Guide

62

«
...
64
65
66
67
68
...
»

Summary of Contents for Liebert IntelliSlot Unity Card











































































Reviews:

No comments

Related manuals for Liebert IntelliSlot Unity Card

Wireless Print Solutions Adapter

Brand: Xerox Pages: 54

Brand: Intermec Pages: 102

Brand: DeLOCK Pages: 4

MISMATCH IS II BRAKE TO SRAM SHIFTER/DROPPER

Brand: Problem Solvers Pages: 8

Brand: GAI-Tronics Pages: 4

HHM Series HHM2208SB1

Brand: TDK Pages: 2

Brand: Lindy Pages: 8

CardPark APA-4510

Brand: Adaptec Pages: 8

Brand: 3idee Pages: 4

FriendlyNET FBT100

Brand: Asante Pages: 44

Brand: i-tecc Pages: 28

Brand: i-tec Pages: 48

VidaCharger Ultra VB VCHR U 48V ADPT

Brand: VidaBox Pages: 4

Brand: SOHARD Pages: 35

FEA-01 F Series

Brand: ABB Pages: 10

Brand: Chauvet Pages: 64

Brand: Konig Pages: 68

Brand: Konig Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands