Vertiv Liebert CRV 300 CW Product Documentation Download Page 5

Page: 5 / 48

2 - 2

Application of Liebert

CRV

Liebert CRV - PD - 265086 - 11.01.2018

2.1 First check

Before proceeding with Liebert

CRV application please make sure the unit selected is suitable for your

site. Liebert

CRV is targeted for small and medium data centers and it is optimized for maximum cool-

ing capacity in a minimal footprint. It is designed for high air inlet temperature (up to 40° C), therefore it

is advised to accomplish Hot-Cold aisle configuration.

Liebert

CRV is able to modulate the cooling capacity in order to quick adjust to any changing heat load.

Liebert

CRV is designed to provide proper control of the room temperature, humidity and air filtration.

The specific design of Liebert

CRV is optimized in order to be extremely efficient without providing

unnecessary latent cooling (dehumidification) not specifically required for cooling of IT electronic equip

ments, which enhance the overall cooling system efficiency.

2.1.1 Hot-Cold aisle configuration

A best practice is to use rows of equipment racks in an alternating arrangement of cold aisles and hot

aisles.

In the cold aisle, the equipment racks are arranged face to face so the cold air discharged from the

Liebert

CRV unit(s) is drawn into the front of the servers and exhausted out through the rear into the

hot aisles. Hot aisles are literally hot because the objective of the alternating cold and hot aisle design

is to separate the source of cooling air from hot air discharge which returns to the Liebert

CRV unit(s).

Therefore, hot and cold aisle should be separated otherwise there would be a mix of hot and cold air

and thereby lower the temperature of the air returning to the CRV units, which reduces their usable

capacity.

Fig. 2a Example of high density installation with cold aisle and hot aisle alternation

Hot aisle

Cold aisle

Hot aisle

Summary of Contents for Liebert CRV 300 CW

















































Search results

Summary of Contents for Liebert CRV 300 CW

Reviews:

Related manuals for Liebert CRV 300 CW

Brands by name

Popular brands

Vertiv Liebert CRV 300 CW, Product Documentation

Search results

Summary of Contents for Liebert CRV 300 CW

Reviews:

Related manuals for Liebert CRV 300 CW

Brands by name

Popular brands