Vertiv Avocent HMXCC1-G2, User Manual

Page: 143 / 240

HMXCC1-G2 User’s Manual
Chapter 4 System Overview and Getting Started
13
18 DVI output connector 1 Connect to a DVI monitor (Video Content: DVI-I ( Digital)).
19 USB indicator Lights up when a USB peripheral is connected.
20 USB Type-A connector Connect to a USB keyboard and mouse.
21 USB Type-A connector Connect to USB peripherals.
22 IR input jack Connect to the IR receiver.
23 RS-232 connector Connect to a RS-232 device.
24 DVI input connector 2 Connect to the DVI output of PC (Video Content: DVI-I ( Digital)).
25 DVI output connector 2 Connect to a DVI monitor (Video Content: DVI-I ( Digital)).
HMX3080T/HMX3080R/HMX3080TP/HMX3080RP (optional) Overview
Figure 4-10
Table 4-9
No. Item Description
1 Reset button Reset the unit.
2 POWER indicator Lights up when power is on.
3 STATUS indicator Lights up when the connection between transmitter and receiver is active.
4 LINK button Press to connect or disconnect between the transmitter and receiver.
5 MODE button After using LINK button to disconnect TX/RX, use this button to set Jumbo Frames.
6 Mic. input jack Connect to a microphone.
7 Audio output jack Connect to a speaker.
8 Power jack Connect to the power adapter.
9 LAN port 1 Connect to the LAN port of TX, RX, or a Gigabit Ethernet Switch.
10 LAN port 2
Connect to the LAN port of TX, RX, or a Gigabit Ethernet Switch. (
*
HMX3080TP/HMX3080RP Models are with
PoE)
11 Audio input jack Connect to the audio output jack of PC.
12 Mic. output jack Connect to the mic. input jack of PC.
13 IR output jack Connect to the IR emitter.
14 USB Type-B connector Connect to the host PC.
15 HID connector Reserved.
16 RS-232 connector Connect to the RS-232 port of PC.
17 DVI input connector Connect to the DVI output of PC (Video Content: DVI-D Digital).