6
Setting or modifying the lower limit
DOWN
BUTTON
2.
Press the
down button
to test the position of
the new limit. Verify if your current condition is
the one described in
case 1
or
2
and perform the
procedure again as needed in each case until
reaching the desired limit.
2.
Press the
up button
until the shade is above
the desired lower limit and then press the
down
button
to test the position of the new limit. Verify
if your current condition is the one described in
case 1
or
2
and perform the procedure again as
needed in each case until reaching the desired
limit.
DOWN
BUTTON
Press the
down button
on the remote control
until the motor stops. Check the current position
of the lower limit, and follow either procedure,
depending on your case.
If the current lower limit is above the desired
limit, follow the procedure below, depending on
the position of the motor.
Current limit
Desired lower limit
If the current lower limit is below the desired
limit, follow the procedure below, depending on
the position of the motor.
Current limit
Desired lower limit
1.
Rotate the hexdriver
counter-clockwise “+”
to
modify the current lower limit.
MOTOR ON THE LEFT
MOTOR ON THE RIGHT
1.
Rotate the hexdriver
clockwise “-”
to modify
the the current lower limit.
MOTOR ON THE LEFT
MOTOR ON THE RIGHT
CASE #1
CASE #2
UP
BUTTON
DOWN
BUTTON
Take into consideration:
7 full turns of the hexagonal grey or yellow limit setting screws equals to 1
turn of the motor tube.
vertilux.com
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
Summary of Contents for 6-700-CM-35R06
Page 20: ......
