3
vertilux.com
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
Do not knock the motor or drill on motor tube, this may affect its operation and void its warranty.
DO NOT USE A HAMMER ON THE MOTOR
DO NOT DRILL INTO MOTOR TUBE
The use of a drill to adjust limits may cause permanent damage to the limit screws and void the warranty.
Pairing the motor with the remote control
DO NOT SET LIMITS USING A DRILL
ONLY USE THE PLASTIC HEXDRIVER THAT
COMES WITH THE MOTOR TO SET THE LIMITS
1.
Turn
OFF
the
AC
power input. Then select the
desired channel and press and hold the
up button
on the remote control
3 s
. Then, turn
ON
the
AC
power. The motor will
“jog”
once.
UP
BUTTON
ON
2.
Press the
up button
again until the motor
“jogs”
. The motor is now paired with the remote
control.
UP
BUTTON
OFF
Summary of Contents for 6-700-CM-35R06
Page 20: ......
