7
Adding an additional remote control or
“cloning” a channel
1.
Using the previously programmed
Vertilux
remote, select the desired channel using the
channel selector button
, then press and hold
the
stop button
for about
5 s
until the motor
“jogs”
.
2.
U
sing a new remote, select the desired
channel using the
channel selector button
, and
then press the
up button
until the motor
“jogs”
.
Vertilux
shades are now paired with the new
remote or channel.
STOP
BUTTON
PREVIOUSLY
PROGRAMMED
REMOTE CONTROL
UP
BUTTON
NEW REMOTE
CONTROL
OR CHANNEL
A previously programmed remote can be used in order to add a new remote or operating channel.
Also, you can copy one channel to another in the same remote control using this procedure.
Changing to tilt or jog mode
Tilt or jog mode
initiates a short motor movement when pressing either up or down buttons.
The
tilt or jog mode
is convenient for Venetian Blinds, Wood Blinds and
Neolux
®
Dual Shades
since it allows the jogging or tilting of the slats in a more precise way. When this mode has been
programmed, the
up
or
down button
must be pressed for
3 s
to return to the motor’s original
setting, otherwise when you press the
up
and
down button
the motor will do short movements.
Repeat the same procedure if you want to return to the
tilt
or
jog mode
.
2.
Release the
stop button
and press it again for
about
2 s
. The motor will
“jog”
again.
The
tilt
or
jog mode
has been programmed.
1.
Press and hold the
stop button
for about
5 s
until the motor
“jogs”
.
STOP
BUTTON
STOP
BUTTON
vertilux.com
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
Summary of Contents for 6-700-CM-35R06
Page 20: ......
