Vertical Cordless Telephone, User Manual

Page: 31 / 42

18
Ranger Cordless Phone User Guide
Answering a Call
When you receive a call, the Handset rings
and you will see:
Establishing a Conference Call
1. Press TALK and dial an intercom station, OR dial the desired outside party.
2. When the called party answers, press the CONF key.
3. Add the next conference party by dialing another intercom station, OR dial
[9] + the second party’s outside number.
4. If the next conference party is an outside line and a busy or wrong number is
encountered, place one of the conference parties on hold. This drops the busy
or wrong number party. Press
CONF again and repeat Step 4.
5. When the last party answers, press CONF twice.
To terminate a Conference , the conference initiator who is actively in the
conference must press the TALK key to end the call.
Basic Phone Features
Handset in the Charging Unit Handset out of Charging Unit
Pick up the Handset. Press TALK ,
-or- press an y ke y o n th e numeri c keypad ,
-or- press the H old , Speed , C onf o r Xfer key.
z Flexible button L 1 ca n b e use d onl y whe n th e cal l i s
o n lin e 1, flexible button L 2 only when th e cal l is o n
lin e 2 .
z When you are on a call and you receive a 2nd
incoming call, you will hear 1 short beep and the
Loop key will start to flash.
--> When you finish the call, place the Handset back in the Charging Unit.
--> Press
TALK to hang up the phone.
Ranger.book Page 18 Friday, May 18, 2007 5:51 PM