Vertical Cordless Telephone User Manual Download Page 22

Page: 22 / 42

Ranger Cordless Phone User Guide

Charging Unit Wall Mounting

The Charging Unit is also designed to be wall mounted. Before mounting your
charging unit, consider the following:

Select a location away from electrical cables, pipes, or other items behind the
mounting location that could be hazardous when placing screws into the wall.

Make sure the wall material is capable of supporting the weight of the
Charging Unit.

Use #10 screws with anchoring devices suitable for the wall material where
the Charging Unit will be placed.

To mount the charging unit on a wall:

Insert two mounting screws 1-1/5
inches apart. Allow about 3/16 of an
inch between the wall and screw
heads for mounting the phone.

Pass the one end through the hole of
the wall mount stand and plug it into
the Charging Unit. Wrap the AC
Adapter cord around the strain relief.

Ranger.book Page 9 Friday, May 18, 2007 5:51 PM

Summary of Contents for Cordless Telephone











































Search results

Summary of Contents for Cordless Telephone

Reviews:

Related manuals for Cordless Telephone

Brands by name

Popular brands

Vertical Cordless Telephone, User Manual

Search results

Summary of Contents for Cordless Telephone

Reviews:

Related manuals for Cordless Telephone

Brands by name

Popular brands