PWC – 600/2000
PureWaterCooler
Copyright 2004 Vertex Water Products
-Drain Connection
2.9 Drain Connection (for units equipped
with RO)
2.10 Remove drain plug (black) from back of
cooler
2.11 Connect supplied black water tubing to
drain connector on back of cooler
2.12 Attach supplied drain saddle to a
standard 1 ½” drain pipe see fig. 1 below
2.13 Turn on feed water at cold water line
2.14 Turn on feed water ball valve at filters
2.15 Plug in cooler (Do not turn on hot tank at
this time)
2.16 Feed water solenoid valve will open
2.17 Water will start to flow through the filters
into the main tank
Feed water Solenoid Valve activates
when cooler is plugged in.
Drain saddle connection method
Drain connection required only for cooler with reverse osmosis filtration
Figure 1
2. Cooler Set-Up
cont.
Figure 2.7