PWC – 600/2000
PureWaterCooler
Copyright 2004 Vertex Water Products
Feedwater/Drain Connections
-Feed Connection
2.3 Pull panel forward and off
2.4 Turn plastic ball valve to on position
(handle in line with tubing)
2.5 Remove feed water plug (orange) from back of
cooler.
2.6 Connect supplied orange feed water tubing to
feed connector on back of cooler.
2.7 Connect orange line to cold water line (figure 2.7).
A self- piercing saddle valve is provided to be the
cold water line connection. The self-piercing
valve is designed to be used on copper pipe only.
2.8 Caution: Filter only units (PWC-2000F) can only
be used on water that is soft (less than 10 grains)
or has a water softener installed to treat the water.
2. Cooler Set-Up
cont.