PWC – 600/2000
PureWaterCooler
Copyright 2004 Vertex Water Products
Completely draining the tanks is required when shipping the cooler
or when on the of the tanks needs replacing. This procedure will
allow you to remove all the water from the cooler.
9.0 Hot Tank Drain: Using a flat head screw
driver, pry the hot tank plug out until you
can grasp it with your fingers.
9.1 Remove the plug with fingers.
Water will pour from the port
9.2 Cold Tank (and Main Tank) Drain: On
the left rear of the cooler, unscrew the
metal cap. Water will pour from this port.
Don’t forget to replace the cap and the
plug after the tanks are empty.
9.3 Drain any remaining water in the
system by depressing the faucets.
9. Draining Cooler Tanks