Winding Position
By putting the crown into its winding position “0”
you can wind the automatic movement manually. To
start the movement simply turn the crown for a few
revolutions however maximum accuracy is ensured
by turning the crown through around 20 revolutions.
Please note, the crown must be returned to position
“X” when wearing the watch.
Date Setting
For the months of the year with fewer than 31 days,
the first day of the following month will need to be set
manually. To do so simply release the screwed in crown
and move it out to position “1” at which point you will
be able to set the date by turning the crown to the left
(direct advance). Please note the rapid advance function
should not be utilized between 8pm and 2am as the
movement will automatically advance the date within
this period.
Time Setting
The time on your watch can be adjusted by pulling
the crown out to position “2” which will stop the
movement. To make use of the movement hacking
functionality and set the time accurately to the second,
stop the movement as the second hand passes 60.
Next, move the minute hand a few minute strokes past
the time to be set. From there position the minute hand
by moving it gently backwards until the correct minute
stroke is directly below it. This method ensures that
the minute hand starts moving as soon as you restart
the movement. By pushing the crown to position “0”
you will then start the second hand. When adjusting
the time be aware of the date change, which occurs at
12 midnight. If the change has occurred at 12 noon the
hands must be moved forward by 12 hours.
Vertex Watches M60 Instruction Manual Date.indd 15
Vertex Watches M60 Instruction Manual Date.indd 15
22/11/2021 22:28
22/11/2021 22:28
