FT-950
Operating Manual
Vertex Standard Co., Ltd.
66
Advice: If you do not find the Menu item number, press the [SELECT] knob
momentarily to switch the Menu item name to the Menu item number.
7. Rotate the [CLAR/VFO-B] knob to perform adjustments to a particular Menu item.
8. Close the PTT switch, and speak into the microphone while listening to the effects
of the changes you are making. Because the overall effect on the sound will change
with each adjustment you make, you should make several passes through each
adjustment area, to be sure that you are achieving the optimum setting.
9. When you have completed all adjustments, press and hold in the [MENU] button
for two seconds to save the new settings and exit to normal operation. If you only
press the [MENU] button momentarily to exit, any changes you performed will not
be stored.
Advice: To roll off excessive bass response in a wide-range studio microphone, try
putting a 10 dB null at 100 Hz with a bandwidth of “1” or “2”, do about a 3 dB null
centered on 800 Hz with a bandwidth of “3,” and then put an 8 dB peak centered on
2100 Hz with a bandwidth of “1.” These are starting recommendations; each
microphone and user’s voice will be different, often requiring different settings.
Activating the Parametric Microphone Equalizer
1. Adjust the [MIC GAIN] knob for SSB use, as described on page ??.
2. Press the [PROC] button momentarily. The “MIC EQ” icon will appear in the
display, confirming that the Parametric Microphone Equalizer is engaged.
Advice
A blinking “MIC ICON” icon indicates the Parametric Microphone Equalizer menu
settings have all been set to “OFF” (“091 TAUD EQ1 FRQ”, “094 TAUD EQ2 FRQ”,
“097 TAUD EQ3 FRQ”.
3. Press the PTT switch on the microphone, and speak into the microphone in a
normal voice level.
4. To switch the Parametric Microphone Equalizer off, press the [PROC] button
repeatedly until the “MIC EQ” icon disappears.
3-Stage Parametric Equalizer Adjustments (Speech Processor: “OFF”)
Center Frequency
“091 TAUD EQ1 FRQ” “100” (Hz) ~ “700” (Hz)
“094 TAUD EQ2 FRQ”
“700” (Hz) ~ “1500” (Hz)
“097 TAUD EQ3 FRQ”
“1500” (Hz) ~ “3200” (Hz)
