FT-950
Operating Manual
Vertex Standard Co., Ltd.
21
[STO] (Store) Button
Pressing this button copies VFO-A contents (frequency, mode, bandwidth, and also
repeater direction/shift frequency and CTCSS functions on the FM mode) into
consecutive QMB Memories.
[RCL] (Recall) Button
Pressing this button recalls one of up to five Quick Memory Bank memories for
operation.
29. [NAR] (Narrow) Switch
In the SSB/CW/RTTY/PSK modes, this button is used to set the bandwidth of the DSP
(digital) IF filters to Narrow bandwidth.
Advice: You may adjust the bandwidth using the [SELECT] knob when the [WIDTH]
button is engaged.
In the AM mode, this button is used to toggle the receiver’s bandwidth between wide (9
kHz) and narrow (6 kHz).
In the FM mode on the 28 MHz and 50 MHz bands, this button is used to toggle the
FM deviation/bandwidth between wide (
±
5.0 kHz Dev./25.0 kHz BW) and narrow (
±
2.5
kHz Dev./12.5 kHz BW).
30. [SPLIT] Switch
Pressing this button to activate split frequency operation between the VFO-A (used for
reception) and the VFO-B (used for transmission). If you press and hold in the [SPLIT]
button for two seconds, the “Quick Split” feature will be engaged, whereby the VFO-B
will automatically be set to a frequency 5 kHz higher than the VFO-A frequency with
same operating mode, and the transceiver will be placed in the Split mode.
31. [TXW] (TX Watch) Switch
Pressing this button lets you monitor the transmit frequency when split frequency
operation is engaged. Release the button to return to normal operation.
32. [C.S] Switch
Press this button momentarily to recall a favorite Menu Selection directly.
To program a Menu selection as the short-cut, press the [MENU] button to enter the
Menu, then select the Menu item you want to set as the short-cut. Now press and hold
in the [C.S] button for two seconds; this will lock in the selected Menu item as the
short-cut.
