Versiton KGC-460, User Manual

Page: 39 / 41

-39-
1. Sharing of uplink fiber channel by two independent media converters
2. Redundancy support on the fiber uplink
Uplink function is working for both converters even either one fiber cable is faulty.
4.5 4P Switch Mode
“4-P Switch” mode is an operating mode that the device works like a typical managed Gigabit Ethernet switch
which has 2 10/100/1000M copper ports and 2 SFP-based dual-speed fiber ports.
The switch is featured:

Management functions:
- HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
- DHCP/DHCPv6 client, DHCP relay, DNS client, NTPv4
- IPv6 support, System Syslog, Configuration down/upload, Software upload

Security functions:
- NAS, 802.1X, MAC-based/Web/CLI authentication
- IP MAC binding, , IP source guard

Layer 2 functions:
- QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
- Storm control for UC/MC/BC packets, Static MAC configuration
- IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
- Multiple Spanning Tree- MSTP. RSTP, STP

Auto Multi-Ring (KAMR) Technology:
- Fast failover response time, Auto recovery when failure is repaired
- Supports up to five redundant rings, Works with RSTP network