Versiton KGC-460, User Manual

Page: 10 / 41

-10-
Power over Ethernet PSE Function (KGC-460-HP)
PSE Ports Port 1, Port 2
Power output pins Positive of power voltage: pin 1,2
Negative of power voltage: pin 3,6
Standard IEEE 802.3at
Classification PD Class 0 ~ 4 detection
Power Delivery 35W max. (per port) at port output for Cat.5 distance up to 100 meters
Protection Under voltage protection
Over voltage protection
Over current detection
Switching Functions
MAC Addresses Table 8K entries
Forwarding & filtering Non-blocking, full wire speed
Switching technology Store and forward
Maximum packet length 9.6K bytes
IP Multicast groups 8192 supported
Flow control IEEE 802.3x pause frame base for full duplex operation
Back pressure for half duplex operation
Terminal Block Connector
DC power input Screwed euro terminal block:

&

contacts
Operating Input Voltages +8 ~ +60VDC (General applications)
+45 ~ +57VDC (PoE applications)
* Warning: The -48VDC power supply is not supported.
Power consumption 5W max. @12VDC (Full load with no PoE support)
75W max. (Full load with 2 PoE max. output)
Alarm relay output 3 terminal contacts (30VDC/1A max. or 120VAC/0.5A max.)
NC contacts: normal – shored, alarm – open
NO contacts: normal – open, alarm – shored
Alarm events Power failure, Specific port link fault (software configured)
Mechanical
Dimension (base) 140 x 106 x 42 mm (HxDxW)
Housing Enclosed metal with no fan
Mounting Din-rail mounting, Panel mounting (optional)