VL-ENCL-5 Reference Manual
8
10.
Install standoffs to the top to support the computer.
The following figures show where to install standoffs to the top of the VL-ENCL-5 to
support the computer.
Warning!
Be sure to use the correct size standoffs for your computer. SUMIT boards
must use the standoffs and screws available as part number VL-HDW-105.
These standoffs are 15.25 mm (0.60 inch), and must not be mixed with the
15.0 mm standoffs used for non-SUMIT boards. Using the standoffs
available as VL-HDW-101 on SUMIT boards will result in damage to the
board.
Figure 6. Standoff Positions for PC/104 Boards
Figure 7. Standoff Positions for EBX Boards
