VL-ENCL-5 Reference Manual
12
Enclosure Lid
The optional enclosure lid includes the following parts.
Metal Parts:
Enclosure lid
Hardware:
(1)
3”
strip double-
sided foam tape 1/2”
(1)
36” strip double
-
sided foam tape 1/2”
(2)
Shoulder washers
Installation
The VL-ENCL-5 lid (VL-ENCL5LID) is shipped unassembled with the enclosure lid hardware
kit. Follow the procedure below to install the lid.
1.
Remove the two screws from the rear of top enclosure.
These are two 6-
32 x 3/8”
screws that will be reused to install the lid.
2.
Tape the front tabs.
Cut the 3” foam tape in half and p
lace it on the front tabs.
3.
Mount the flat pane display.
Cut
the 36” foam
tape into appropriate size strips and use it to mount the display.
4.
Install the shoulder washers.
Install one shoulder washer on each inside lid flange, on both sides of top.
5.
Reinstall the lid using the screws removed in step 1.
