manualshive.com logo in svg

VersaLogic VL-ENCL-5, Reference Manual

Share
Download
VersaLogic VL-ENCL-5 Reference Manual Download Page 13

 

 

 

VL-ENCL-5 Reference Manual 

 

9

 

 

Figure 8. Standoff Positions for EPIC Boards 

 

11.

 

Reinstall the enclosure top. 

Thread the breakout board, back panel, power, and drive cables through the holes in the 
enclosure top while keeping the vent towards the drive bay. Place the top over the 
components and secure it with the screws removed in step 1. 

12.

 

Attach the computer to the standoffs. 

Place the board on the standoffs and use M3 nuts to secure the board to the enclosure. 

Dual-board computers: If your computer is a dual-board set, you must separate the two 
boards before securing it to the enclosure. After separating the boards, secure the south 
board to the enclosure, and then re-mate the dual-board set, using care not to bend any pins 
or misalign the inter-board connectors. Improper alignment could result in damage to the 
computer. 

13.

 

Connect the cables. 

See the reference manual for your computer for proper cable connections. The following 
figures show examples of complete installations of PC/104, EBX, and EPIC computers. 

 

Summary of Contents for VL-ENCL-5

















Reviews:

No comments

Brands by name

Popular brands

Load more brands