VersaLogic Iguana VL-EPIC-25, Reference Manual

Page: 14 / 70

VL-EPIC-25 Reference Manual 8
Configuration and Setup
Initial Configuration
The following components are recommended for a typical development system with the Iguana:

ATX power supply

DDR3 DRAM module

USB keyboard and mouse

SATA hard drive

USB CD-ROM drive

LVDS or VGA display
The following VersaLogic cables are recommended:

VL-CBR-2022 – Power adapter cable

VL-CBR-5013 – Paddleboard

VL-CBR-0701 – SATA data cable

LVDS or VGA video adapter cable
You will also need an operating system (OS) installation CD-ROM.
Basic Setup
The following steps outline the procedure for setting up a typical development system. The
Iguana should be handled at an ESD workstation or while wearing a grounded antistatic wrist
strap.
Before you begin, unpack the Iguana and accessories. Verify that you received all the items you
ordered. Inspect the system visually for any damage that may have occurred in shipping. Contact
Support@VersaLogic.com immediately if any items are damaged or missing.
Gather all the peripheral devices you plan to attach to the Iguana and their interface and power
cables.
It is recommended that you attach standoffs to the board (see Hardware Assembly) to stabilize
the board and make it easier to work with.
Figure 1 shows a typical start-up configuration.
2 2