background image

20306756

380IDV Fireplace Insert

3

4.  Never install the insert 

• 

in a recreational vehicle

  where curtains, furniture, clothing, or other flam

-

mable objects are less than 36" from the front, top, 

or sides of the insert

  in high traffic areas

  in windy or drafty areas 

5.  This insert reaches high temperatures. Keep children 

and adults away from hot surfaces to avoid burns or 

clothing ignition. Insert will remain hot for a time after 

shutdown. Allow surfaces to cool before touching. 

6.  Young children should be carefully supervised when 

they are in the same room as the appliance. Toddlers, 

young children and others may be susceptible to 

accidental contact burns. A physical barrier is recom-

mended if there are at risk individuals in the house. To 

restrict access to a fireplace or stove, install an adjust

-

able safety gate to keep toddlers, young children and 

other at risk individuals out of the room and away from 

hot surfaces.  

7.  Do not modify insert under any circumstances. Any 

parts removed for servicing must be replaced prior to 

operating insert. 

8.  Turn insert off and let cool before servicing, installing, 

or repairing. Only a qualified service person should 

install, service, or repair the insert. Have burner system 

inspected annually by a qualified service person. 

9.  You must keep control compartments, burners, and 

circulating air passages clean. More frequent cleaning 

may be needed due to excessive lint and dust. Turn off 

the gas valve and pilot light before cleaning insert. 

10. Have venting system inspected annually by a quali-

fied service person. If needed, have venting system 

cleaned or repaired. Refer to 

Cleaning and Mainte-

nance

, Page 29. 

11.  Keep the area around your insert clear of combustible 

materials, gasoline, and other flammable vapor and liq

-

uids. Do not run insert where these are used or stored. 

Do not place items such as clothing or decorations on 

or around insert. 

IMPORTANT SAFETY INFORMATION

This insert is a vented product. This insert must be properly 

installed by a qualified service person. The glass door must 

be properly seated and sealed. If this unit is not properly 

installed  by  a  qualified  service  person  with  glass  door 

properly seated and sealed, combustion leakage can occur. 

CARBON MONOXIDE POISONING:

 Early signs of carbon 

monoxide poisoning are similar to the flu with headaches, 

dizziness  and/or  nausea.  If  you  have  these  signs,  the 

insert may not have been installed properly. Get fresh air at 

once! Have the insert inspected and serviced by a qualified 

service person. Some people are more affected by carbon 

monoxide than others. These include pregnant women, 

people with heart or lung disease or anemia, those under 

the influence of alcohol, and those at high altitudes. 

Propane/LP gas and natural gas are both odorless. An 

odor-making agent is added to each of these gases. The 

odor helps you detect a gas leak. However, the odor added 

to these gases can fade. Gas may be present even though 

no odor exists.
Make certain you read and understand all warnings. Keep 

this manual for reference. It is your guide to safe and proper 

operation of this insert.
1.  This appliance is only for use with the type of gas 

indicated on the rating plate. This appliance is not 

convertible for use with other gases unless a certified 

kit is used. 

2.  For propane/LP insert, do not place propane/LP supply 

tank(s) inside any structure. Locate propane/LP supply 

tank(s) outdoors. To prevent performance problems, 

do not use propane/LP fuel tank of less than 100 

lbs. capacity. 

3.  If you smell gas

  shut off gas supply.

• 

do not try to light any appliance.

• 

do not touch any electrical switch; do not use any 

phone in your building .

• 

immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

INSTALLER

Please leave these instructions with the appliance.

OWNER

Please retain these instructions for future reference.

WARNING

• 

Read this owner’s manual carefully and completely before trying to assemble, operate, or service this 

fireplace. 

• 

Any change to this fireplace or its controls can be dangerous.

• 

Improper installation or use of this fireplace can cause serious injury or death from fire, burns, explosions, 

electrical shock and carbon monoxide poisoning.

Summary of Contents for 380IDVNVSB









































Reviews: