20306756
380IDV Fireplace Insert
19
Figure 18 -
Glass Frame Removal
INSERT INSTALLATION
GLASS FRAME REMOVAL
NOTE:
If the safety barrier is in place, you must first remove
it before you remove the glass frame. To remove the barrier,
simply lift up and pull out until the tabs are clear of their
corresponding slots on the firebox. Then proceed to remove
the glass frame by following the steps below.
1. Release two clamps on bottom of fireplace.
2. Tilt glass frame out and lift glass frame up until it clears
three tabs on top of fireplace.
3. Set glass frame aside.
W
ARNING
Make sure the glass panel edges do not
touch any metal parts during thermal ex
-
pansion.
CAUTION
Always use gloves when handling broken
glass.
DANGER
HOT GLASS
WILL
CAUSE BURNS
.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Un panneau vitré chaud
peut
causer des brûlures.
Laissez refroidir le panneau
vitr
é
avant d’y toucher.
Ne laisser jamais
les enfants
toucher le panneau vitr
é
.
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
Une barrière visant à réduire le risque de brûlure
par le hublot chaude est fournie avec cet
appareil et doit être installé.
DANGER
Latches
Barrier Screen
Glass Frame
