Inovys II
2011-11
Page 9
EN
NL
2.8 Pushing handles
L
CAUTION:
Risk of injury - Make sure that the star buttons
are properly
tightened.
L
CAUTION:
Risk of tipping over - Use only the last indentation of the pushing
handle tube for the maximum height adjustment.
The pushing handles can be adjusted in height
depending on the size of the attendant.
1. Loosen the star button
located on the
back of the backrest.
2. Pull the pushing handles into the desired
position (7 positions). Indentions
(steps
30 mm) have been placed into the tubing of
the pushing handles.
3. Retighten the star button
firmly by hand.
2.9 Mounting or removing backrest
L
WARNING:
Risk of injury – Check that the backrest is firmly mounted into the
four brackets before using your wheelchair.
L
WARNING:
Risk of injury – Avoid getting your fingers, clothes caught during the
assembly process.
The backrest of the wheelchair can be mounted
by following instructions.
1. Mount the backrest into the four brackets
+
.
2. Turn on the upper star buttons
to lock the
star buttons by hand.
3. Check that the backrest is firmly fixated.
To remove the backrest of the wheelchair:
1. Loosen the upper star buttons
.
2. Pull the backrest upwards out the four
brackets
+
.
2.10 Transfer in and out the wheelchair
L
CAUTION:
In case you cannot perform the transfer in a safe manner, ask
someone to assist you.
L
CAUTION:
Risk of tipping over of the wheelchair – Do not stand on the foot
plates.
