Vermeiren Eclips+ AD, Instruction Manual

Page: 23 / 120

EN
AD
2011-03
!"#$%'&%
3.9 Adjusting of the pushing handles
!
"
WARNING:
Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
!
"
WARNING:
Risk of tipping over - Make sure that the tubes of the pushing
handles are positioned identically on both sides.
3.9.1 Pushing handles
The tube handle " is fixed to the back frame ! .
Adjust the height of the pushing handles as follow:
1. Remove the arm supports.
2. Remove the screws
# .
3. Remove the screws
$
for suspending the
armrests.
4. Pull the tube handle to the desired height.
Pusing handle height Tube handles "
Tube frame
!
910 mm (35.83 in.)
(Standard)
Hole 9 and 11 Hole 1 and 2
925 mm (36.42 in.) Hole 8 and 10 Hole 1 and 2
940 mm (37.00 in.) Hole 7 and 9 Hole 1 and 2
955 mm (37.60 in.) Hole 6 and 8 Hole 1 and 2
970 mm (38.19 in.) Hole 5 and 7 Hole 1 and 2
985 mm (38.78 in.) Hole 4 and 6 Hole 1 and 2
1000 mm (39.37 in.) Hole 3 and 5 Hole 1 and 2
1015 mm (39.96 in.) Hole 2 and 4 Hole 1 and 2
Table 4: Pushing handle heights
5. Retighten all the fixing screws
# ! $ "
properly.
1
A B