25-16 10 Service Hours
BC1000XL Brush Chipper Maintenance
Drum Inspection
The cutter drum must be free of any damage. Thoroughly clean and inspect the following:
•
Air Paddles — Inspect air paddles (1) and their gussets (2) for cracking and deformation.
•
Edge Welds — Inspect entire drum for cracks (3) in the welds where the drum sides are joined to the
drum. Use a mirror to aid in this inspection.
•
Pockets — Closely inspect area in and around knife mount and pockets (4) for damage or cracks.
•
Cutter Drum Surface — Inspect drum surface (5) for cracks that may begin at the pockets and migrate
outward.
If any drum damage or cracks are found, contact an authorized independent Vermeer dealer.
4
5
2
1
3
3
3
3
3_03
Summary of Contents for BC1000XL
