8. Guide the chain through the hook block.
You can use the chain insertion tool to help
pulling the chain through the hook block.
9. Straighten the chain.
There may not be any twists in the chain
between the chain hoist and the hook in
either of the chain falls.
9.1 Rotate the hook until there are no
twists in the chain.
9.2 Straighten any twists on the free end
of the chain before attaching the chain
to the fixed end position.
10. Attach the chain to the fixed end position.
10.1Place the first chain link into the slot of
the suspension point.
10.2Insert the pin (2), which holds the
chain in place, into the hole on the
side.
10.3Push in the pin completely using a
hexagon key or a similar tool. The pin
secures the fixation of the chain only,
when you place it properly to the end
stop.
10.4Pull on the chain and check visually
that you have attached the pin and the
chain correctly.
10.5Apply Loctite thread locker to the
locking screw (1). Tighten the screw
carefully to secure the fixation of the
pin on its place.
1
2
GEBRUIKERSHANDLEIDING
Dit document en de daarin vervatte informatie vormt het exclusieve eigendom van Verlinde S.A.S. en vertegenwoordigt
een niet openbaar, vertrouwelijk en gepatenteerd handelsgeheim dat niet mag worden vermenigvuldigd, onthuld aan
derden, gewijzigd, of anderszins op enigerlei wijze mag worden toegepast zonder de uitdrukkelijke schriftelijke
toestemming van Verlinde S.A.S. Copyright 2020 © Verlinde S.A.S. Alle rechten voorbehouden.
4/2020
