Verizon CR1000B, User Manual

Page: 52 / 194

52
03 / WI-FI SETTINGS
©2022 Verizon. All Rights Reserved
• Click Register Register.
• Alternatively, you can enter the router’s PIN shown on this
screen into the WPS user interface of your device, if this
PIN mode is supported by your Wi-Fi device.
4. After pressing the unified button (WPS) on your router, you
have two minutes to press the WPS button on the client
device before the WPS session times out.
When the unified button (WPS) on your router is pressed,
the Router Status LED on the front of your router begins
flashing blue. The flashing continues until WPS pairing to the
client device completes successfully. At this time, the Router
Status LED turns solid blue.
If WPS fails to establish a connection to a Wi-Fi client device
within two minutes, the Router Status LED on your router
flashes red for two minutes to indicate the WPS pairing
process was unsuccessful. After flashing red, the light
returns to solid white to indicate that Wi-Fi is on.
Note: Wi-Fi Protected Setup (WPS) cannot be used if WPA3
security is enabled or SSID broadcast is disabled or if MAC
address authentication is enabled with an empty white list.