Verizon CR1000B User Manual Download Page 12

Page: 12 / 194

GETTING TO kNOW YOUR
VERIzON ROUTER

• Type-C USB

Type-C USB - provides up to 1000 mA at 5 VDC for attached

devices. For example, you could charge a cell phone.

• 10Gbps Ethernet WAN

10Gbps Ethernet WAN - connects your Verizon Router to the

internet using an Ethernet cable.

• Coax LAN

Coax LAN - connects your router to other MoCA devices using

a coaxial cable.

Warning:

The coax port is intended for connection to Verizon

devices only. It must not be connected to any exterior or interior

coaxial wires not designated for Verizon devices.

• Reset Button

Reset Button - allows you to reset your router to the factory

default settings. To perform a soft reboot, press and hold the

button for at least three seconds. To reset your router to the

factory default settings, press and hold the button for at least

ten seconds.

• Power

Power - connects your Verizon Router to an electrical wall outlet

using the supplied power adapter.

Warning:

The included power adapter is for home use only,

supporting voltages from 105-125 voltage in AC. Do not use in

environments with greater than 125 voltage in AC.

Summary of Contents for CR1000B



























































































































































































Search results

Summary of Contents for CR1000B

Reviews:

Brands by name

Popular brands

Verizon CR1000B, User Manual

Search results

Summary of Contents for CR1000B

Reviews:

Brands by name

Popular brands