manualshive.com logo in svg

Verizon 4G LTE, User Manual

Share
Download
Verizon 4G LTE User Manual Download Page 56

Manage Your Network

55

Verizon 4G LTE Broadband Router 

-     Tx B/s

: The transmission rate.

-     Rx B/s

: The receiving rate.

-     System Uptime

: Time elapsed since your router’s last reboot.

•

Connection Status

. 

-     Connection Time

: How long the device has been connected to the network.

-     Connecting to server

: Whether the device is connected to the server (On/Off).

-     Negotiation

: The status of the network connection.

-     Authentication

: The status of the network connection.

-     IP address

: The unique public address provided to your router by the wireless 

mobile network.

-     Network Mask

: The network mask address provided to your router by the 

wireless mobile network.

View Connected Devices

The

 Attached Devices

 screen shows all computers, smartphones and tablets that your 

router discovered on the local network. 

To see the attached devices:

1.

Sign in to the web user interface.

2.

From the main menu, select 

Connected Devices > Connected Devices

.

For each device, the table shows the following: 

•

IP address

•

Device name if available

•

Ethernet MAC address 

Summary of Contents for 4G LTE













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands