4
At the rear upper RU of the rack, insert the rear of the rail into the top and the
bottom holes of the RU.
5
Extend the rail toward the front of the rack and insert it into the top and the
bottom holes of the RU.
6
Repeat steps
and
to install the right rail.
RIGHT
7
Make sure that both rails are parallel and secure.
8
Fully extend both rails forward until the release buttons click.
9
Carefully lift the compute node and tilt the rear down towards the back of the
rails.
10
Locate the slots at the back of each rail.
38
Installation procedures
Installing the Velocity 7330 compute node
