With this step, NetBackup is re-configured to operate with the new host name.
This process may take a while to complete.
For the command
Hostname set
to work, at least one IPv4 address is required.
For example, you may want to set the host name of a specific host to v46. To
do that, first ensure that the specific host has at least an IPv4 address and
then run the following command.
Main_Menu > Network > Hostname set v46
10
In addition to the above network configuration settings, you may also use the
Main_Menu
>
Network
view to create a bond and to tag a VLAN during the
initial configuration of your appliance network.
■
Use the
Network > LinkAggregation Create
command to create a bond
between two or more network interfaces.
■
Use the
Network > VLAN Tag
command to tag a VLAN to a physical
interface or bond interface.
For detailed information about the
LinkAggregation
and the
VLAN
command
options, refer to the
NetBackup Appliance Command Reference Guide
.
11
From the
Main_Menu
>
Network
view, use the following commands to set the
time zone, the date, and the time for this appliance:
■
Set the time zone by entering the following command:
TimeZone Set
Select the appropriate time zone from the displayed list.
■
Set the date and the time by entering the following command:
Date Set
Month Day HHMMSS Year
Where
Month
is the name of the month.
Where
Day
is the day of the month from 0 to 31.
Where
HHMMSS
is the hour, minute, and seconds in a 24-hour format.
The fields are separated by semi-colons, for example, HH:MM:SS.
Where
Year
is the calendar year from 1970 through 2037.
55
Initial configuration procedures
Performing the initial configuration on a 52xx master server appliance from the NetBackup Appliance Shell
Menu
