VERITAS 5250 Hardware Installation Manual Download Page 21

Page: 21 / 151

Preinstallation
requirements

This chapter includes the following topics:

■

Customer-provided environment and supplies

■

Appliance shipping container contents

■

Storage shelf shipping container contents

■

Best practices for rack installation

■

Determining rack locations

■

Storage shelf rack requirements

■

Heat dissipation

■

Verifying SAS-3 cable length

■

Prerequisites for IPMI configuration

Customer-provided environment and supplies

For best ventilation, the rack cabinet:

■

Should be at least 100 cm (4 feet) from walls

■

Should have at least 100 cm (4 feet) from other cabinets on the front and back
of the appliance and the storage shelves

Data centers with two-foot spaces in the front and in the back of the appliances are
acceptable with proper cooling and ventilation.

Refer to the following section for more details.

Chapter

Summary of Contents for 5250
























































































































































Search results

Summary of Contents for 5250

Reviews:

Related manuals for 5250

Brands by name

Popular brands

VERITAS 5250, Hardware Installation Manual

Search results

Summary of Contents for 5250

Reviews:

Related manuals for 5250

Brands by name

Popular brands