Verint Nextiva S2700e, User Manual

Page: 36 / 101

2: Mounting and Configuring the IP Camera
26 Verint Video Intelligence Solutions
Adjust the pan and tilt to indicate the general area of interest; then rotate the lens to
ensure that the image is upright.
To adjust the pan angle:
1. Ensure that the pan fastening screw is loosened. Moving the video sensor module
without loosening the screw may damage it.
2. Move the video sensor module in the desired direction.
3. Fasten the pan fastening screw.
To adjust the tilt angle:
1. Loosen the tilt fastening screw.
2. Move the video sensor module in the desired direction.
3. Fasten the tilt fastening screw.
To adjust the rotation:
„
Using the rotation knobs, position the upright direction mark so that the arrow points
towards the top of the image.
Adjusting the Field Angle, Focus, and
Brightness
After positioning the camera in the desired direction, adjust the field angle, focus, and
brightness.
Note: Moving the camera beyond its adjustable range may break it.
As the camera has a wide tilt/rotation range, a part of the actual device may appear
on the screen depending on the field angle and orientation.
Warning: Discharge static electricity by touching the MONITOR plug with your hand before
adjusting the image.
Note: When adjusting the rotation, never hold the lens: Always use the rotation
knobs. Applying force on the lens may damage it.