Verint Nextiva S2700e, User Manual

Page: 22 / 101

2: Mounting and Configuring the IP Camera
12 Verint Video Intelligence Solutions
Mounting the S2700e and S2700eP
Cameras
There are many ways to mount the S2700e and S2700eP models:
„
Embedding in the ceiling
„
Mounting directly on the ceiling or wall
„
Mounting to an electrical box
The mounting procedure involves three main steps:
1. Preparation
2. Connection of cables and wires
3. Physical installation
Preparing the Camera
The first step in mounting the camera is preparing the surface and taking the camera apart.
To prepare the camera for mounting:
1. If you are embedding the camera in the ceiling, open a hole (4.7 inch/120 mm
diameter) at the desired location.
2. If you are mounting the camera on the ceiling or wall, open a hole (1.4 inch/35 mm
diameter) at the desired location; use the supplied template (see Appendix C on
page 69).
3. Draw the cables out of the ceiling or wall.
Note: You can mount these cameras on North-American, European, and Japanese
electrical boxes.
Warning: Ensure that the thickness of the ceiling material is between 0.37 and
0.87 inch (9.5 and 22 mm).