Verint Nextiva S1100, User Manual

Page: 47 / 107

Verint Video Intelligence Solutions 35
Nextiva S1100 User Guide
To perform an advanced configuration:
1. At the bottom of the Unit Information pane, click Advanced Setup.
2. Perform the necessary changes.
3. Click Save.
If there is a functional RF communication between the devices, the Configuration
Assistant sends the relevant parameters to the transmitter. Otherwise, a message
appears, asking you to connect the transmitter to the COM port of the computer.
The devices reboot.
General
The general parameter is:
Wireless
The available wireless parameters are:
Here is additional information on some of these parameters:
„
Repeater Mode—If you set the mode to Enabled, you will need to use the SConfigurator
tool, instead of the Configuration Assistant, to subsequently change any wireless
parameter; otherwise, the repeater will not work properly. For more information,
page 40.
„
Pair Number—You need to assign a unique pair number to the devices being configured
when more than one pair are used with the same S3100-RP repeater.
„
RF Band—If the 4.9 GHz band is selected, the Channel Bandwidth parameter is
available.