Verint Nextiva S1100, User Manual

Page: 37 / 107

Verint Video Intelligence Solutions 25
Nextiva S1100 User Guide
RS-422/485
You use the CAB9P cable to properly connect the device to an RS-422 or RS-485 peripheral.
Here is the wiring scheme for the four-wire RS-422 or RS-485 protocol:
These connections apply on both transmitter and receiver devices. For example, here is an
S1100 transmitter connected to a PTZ camera in an RS-422 2-wire context:
Cable Peripheral
Signal name Wire pair Wire color Signal name
Rx+ green/black green Rx+
Rx- black Rx-
Tx+ yellow/black yellow Tx+
Tx- black Tx-
Signal ground brown/black brown Signal ground
Signal ground black Signal ground
Status
Signal ground
(brown and black)
Coax cable
BNC barrel
connector
Target device (PTZ)
Power (red and black)
Tx+ / Tx-
(yellow and black)
Rx+ / Rx-
(green and black)
Rx+ / Rx-
Signal ground