Verilink Wansuite 5230, Reference Manual

Page: 66 / 233

3-36 W A N s u i t e 5 2 6 0 / 5 2 3 0
Figure 3.29 CHAP Details Screen
To change the Username and Secret for a selected CHAP Index, enter the new
information in the appropriate field(s) and click the “Submit” button.
The “Type Details” button returns you to the PPP Type Details screen.
IP Service Details Screen
The IP Service Details screen and Ethernet Stats screens are described in
Figure 3.9 on page 3-14 and Figure 3.10 on page 3-15, respectively.
Applications
The Applications screens describe configuration tables and statistics for
Layer 3 and above that do not map to a specific service or interface.
Endpoint Table Screen
The Endpoint Table (Figure 3.30) describes all endpoints terminating in the
unit; user-activated buttons are provided to view the Endpoint Details,
Endpoint Service Details, and Endpoint DLCI Details screens. The unit will
automatically learn all DLCIs from the network side and relay that
information on the serial side with default values.
The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database only after at least one endpoint parameter has been
changed and submitted in the Endpoint Details screen (page 3-37).
NOTICE:
The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database only after at least one endpoint parameter has
been changed and submitted in the Endpoint Details Screen on
page 3-37. When in IP Gateway, if you decide to use a “discovered”
endpoint, you must rename it. A discovered endpoint cannot be used
elsewhere (i.e., IP Gateway) until it has been renamed. Also, it will not
be saved in the configuration database.