4-74
W A N s u i t e 5 2 6 0 / 5 2 3 0
Figure 4.67
NAT Port Status Screen
IP Address
Original IP Address of the host.
NAT IP Address
Translated IP Address of the host.
Processed Packets
Number of packets processed by NAT for this address.
Static UDP Trans Table Screen
The Static UDP Trans Table screen (Figure 4.68) allows static mapping of
global UDP Server ports to a local host IP address/port combination. The
parameters described below enable access to UDP Servers on the private/
corporate network “behind the NAT.” The parameters may be used only when
in NAPT mode.
Figure 4.68
Static UDP Translation Table Screen
Global Port
Decimal IP Port exposed to the global Internet. Default is 0.
Server Port
Decimal IP Port of the local UDP Server. This port is usually the same as the
Global Port. Default is 0.
Summary of Contents for Wansuite 5230
