15
Omni 3200M Installation Guide
To connect a CR 600 check reader (see Figure 11):
1.
If the cable is not already connected to the check reader,
insert the small modular plug on one end of the cable into
the modular jack on the check reader.
2.
Insert the larger RJ45-type connector on the other end of
the cable into the “RS232” serial port on the back panel of
the Omni 3200M terminal.
Figure 11 CR 600 Check Reader Connection
When you complete the next step of this installation procedure,
“Step 7: Connect the Terminal Power Pack,” you may then also
connect the CR 600 check reader to its power source.
Connect a Smart Card Reader/Writer or PINpad 501
To connect a SC 4xx or SC 5xx smart card reader/writer, or a
PINpad 501, to the Omni 3200M terminal (see Figure 12):
1.
If a cable is not already connected to the smart card reader/
writer or PINpad 501, insert the small modular plug on
one end of the interface cable into the modular jack on the
optional device.
Summary of Contents for Omni 3200M
Page 2: ...Omni 3200M Installation Guide...
Page 5: ......
