11
Ganging
WARNING: Ganging of cabinets provides limited stability and is not a substitute for proper leveling and
anchoring to the floor
.
NOTE: Item # RAGAN04 Ganging Kit is required to gang two cabinets together (sold separately).
1. Cabinets can be ganged together with or without side panels installed.
2. Ensure cabinets are level and anchored to the floor before ganging.
3. If installed, remove the front and rear doors (see instructions for removing doors on page 13).
4. Install (2) ganging brackets on the front posts and (2) on the rear posts, using (2) M5 screws to secure each
bracket. One bracket should be installed towards the top of the cabinet and the other towards the bottom.
5. Replace doors if removed.
