1
IMPORTANT SAFETY INFORMATION
Save These Instructions
This manual contains important safety information and instructions that should be followed during the installation and use
of this product. Read and follow all safety, installation, and operating instructions contained in this manual to maintain
compliance with agency listings. Failure to follow these instructions may result in equipment damage, personal injury, or
death, and may void the warranty.
•
Only trained service personnel should receive, unpack, and assemble this product.
•
Inspect the shipping container and the cabinet for damage prior to installation. Do not use if the cabinet is damaged.
•
Move the cabinet as close to the installation location as possible before removing packing materials. Casters are
meant for moving the cabinet over short distances only on smooth, flat surfaces.
• Use caution when cutting packing materials. Damage that occurs during unpacking is not covered by the warranty.
•
Save all packing materials for future use.
• Do not attempt to remove the cabinet from the pallet unassisted – a minimum of 2 people is required.
• Use extreme caution when moving the cabinet on its casters. Sudden stops, excessive force, or uneven surfaces may
cause the cabinet to tip over, potentially causing personal injury and/or property damage.
• When rolling the cabinet on casters, always push from the front or rear. Never push on the side panels.
•
Casters are only designed for short-distance movement and not long-term support. Use the levelers and/or mounting
brackets for long-term support and security.
• Install the cabinet in a controlled indoor environment, free from moisture, flammable liquids, gasses, corrosive
substances, dust and other contaminants, and temperature extremes. Do not use outdoors or in harsh environments.
• This cabinet must be installed on a flat, level, structurally sound surface that is able to bear the weight of the cabinet
and all the installed equipment, as well as neighboring cabinets and their equipment.
• Leave adequate space at the front and rear of the cabinet for proper ventilation and door swings.
•
Never block or insert objects into the ventilation holes or other openings.
• Anchor the cabinet to the floor using the mounting brackets that secured the cabinet to the shipping pallet.
• Only trained service personnel should install equipment in the cabinet.
• Install equipment from the bottom up, never from the top down, and install the heaviest equipment in the bottom
one-third of the cabinet.
• Be sure to read and follow all individual manufacturer equipment manuals for safety and installation instructions.
• This product is designed for commercial/industrial use only. It is not intended for use with life support or other
U.S. FDA designated “critical” devices.
