Images
folder. This folder is created when a test is run and images are captured. This
folder contains all the captured test images in the format 'Date-Time-Temperature-
SequenceNumber.tif'.
4.7.4.11
File Formats
There are several files created when running the CAF software:
.tiff
Image Files. These files are stored in two different formats in the
'AutoAnalysisResults', 'AnalysisResults' and 'Images' folders.
'Date-Time-Temperature-SequenceNumber.tif'. These files are saved in the Images
folder and each file is approximately 1.8Mb.
'Test piece description plus the melt letters.tif'. These files are saved in the
'AutoAnalysisResults' and 'AnalysisResults' folder and each file is approximately 1.8Mb.
The '.tiff' image files can be imported into any Image editing program or Microsoft Word
or Excel for inclusion in test reports etc. The Results.csv and the Results.xml files
containing the temperature data can also be inserted into a Microsoft documents as a
table or opened as spread sheets.
CaptureSettings.xml
. This file is created in the 'User Test Name' folder. It is a record
of the settings used when the test was first run. Time stamp will indicate when the test
was started.
AutoSettings.xml
. (Automatic Analysis) This file is created in the 'User Test Name'
folder. It is created every time the automatic analysis 'Start' button is selected. The data
contained within this file is for software functionality only and is not relevant to the user.
Settings.xml
. This file is created in the 'User Test Name' folder. It is written during the
analysis phase. When any settings are changed while in Analysis mode this file will be
updated. This could include changing test piece names, grid parameters, etc. time
stamp will indicate the last change.
AutoResults.xml
. (Automatic Analysis) This file is created in the 'User Test Name'
folder when the automatic analysis is complete. This holds the data from the automatic
analysis results.
Note
: AutoResults.xml and Results.xml look very similar in their layout but they are not
interchangeable.
Results.xml
(Manual Analysis) This file is created in the 'User Test Name' folder when
test piece results are saved. This holds the data from the manual results form, i.e.
Temperature, filename for the original image at that temperature, modified filename
(test piece description plus the melt letters) for the image at that temperature, plus grid
position information. If you move the grid, for example for test piece one between
saving each temperature, this information will be saved here.
Results.xlsx
. This file is created in the 'AnalysisResults' or the 'AutoAnalysisResults'
folder when the results table is saved and is in the same format as the first page of the
analysis report printout.
Results.csv.
This file is also created in the 'AnalysisResults' or the 'AutoAnalysisResults'
folder and holds the same information as the Results.xlsx file but as comma separated
value format.
44
Summary of Contents for CARBOLITE GERO CAF G5
