Page 50 of 65
5. To set the router for DHCP click on
LAN IP Setup
.
6. Select
Use Router as DHCP server
.
7. Enter a
Starting IP Address
and an
Ending IP Address.
8. Click
Apply
.
9. On the Main menu in the Maintenance section click on Attached Devices. Write down the IP address
assigned to the camera.
10. Click
OK
.
Veo Observer as a Virtual Server
1. Click on
Port Forwarding
.
2. Click on
Add Custom Service.
3. Enter a name for the camera under
Service Name
.
4. For the
Starting Port
enter
80
.
5. For the
Ending Port
enter
80.
7. Enter the IP address assigned to the camera for
Server IP Address
. Repeat the process for port
1600
.
8. Click
Apply
at the bottom of the menu.
