- 24
Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN
8-3-4. Motion detected message on the main window.
When the motion detection function is enabled, and a motion detected, a message
will be displayed at the bottom.
8-3-5. FTP uploads when motion detected.
The motion-detected images can also be uploaded to FTP server. The procedures
are as follow:
Enter the IP address or domain name of the
“FTP Server”.
Enter
the “Username” and “Password” of the FTP server.
Certain FTP servers need an
“Account” field. Leave it blank if it is not needed.
Enter
the “Remote folder” upload path information for saving the images.
Confirm by selecting the [Save Settings] option to save the settings.
8-3-6.Alert OUT Setup
When the Alert OUT function is enabled ,
and a motion detected, a message will be
send to Mail or Ftp site by manual setting
Note. About GPIO function, we
only provides a set to be possible to use
Please check the image what GPIO IN/OUT may use.
GPIO IN
GND VCC
GPIO OUT
Enable
