- 15
Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN
3-4. On the LAN use with the ADSL Router
If the Observer Plus was installed on the ADSL router, the Observer Plus will
dynamically be allocated an IP address from the DHCP server. However, if you want
to access the Observer Plus from the WAN, the Observer Plus IP address needs to
be setup as fixed IP. Same goes for the Virtual Server function of ADSL router, which
needs to be setup as well.
1. Setup the Observer Plus as Fixed IP, such as 192.168.0.49.
2.
Enter the administrator page of +ADSL router. (Use sonnet ASDL router as an
example).
3. Enter the Virtual Server Page.
A. Setup the mapping of HTTP Port (80) to 192.168.0.49.
B. Restart the ADSL router.
Then the Observer Plus can be accessed from WAN, by the ADSL WAN IP Address.
3-5. Access the Observer Plus by ordinary user login.
If the user accesses the Observer Plus by an ordinary user account, the Observer
Plus would not allow the user to access the privileged functions. From the following
screen, the Camera Control, Resolution, Quality, and Configuration are disabled.
4. Observer Plus Network Camera on-line
After setting up the IP based on the above step, execute IE directly on PC. The left
side of the above diagram is the control panel and the right side is image display.
