- 23
Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN
When motion detection is enabled, the user can setup the mail function to send the
motion-detected images to the preset mail address. The procedures are as follow:
Motion Detect set to “Enable” state.
Setup the “SMTP Mail Server” and E-Mail address.
(Password use or not)
Enter the sen
der’s email address in “Sender” field
and the recipient’s email address in the “Receiver”
field.
The u
ser can change the “Subject” field.
If the mail server needs authentication, check the
“Password” check box. Also, enter the password;
otherwise the “Password” field does not need to
be filled in.
Check the “Send mail when motion detected” check box to enable the operation.
If the check box is not checked, the motion detected send mail function will not
be enabled.
Confirm by selecting [Save Settings] option to save the settings.
Note:
If all of the items are enabled resulting in a motion event detection, the Observer
Plus will send the motion-detected images to the preset email address. The
maximum number of images allowed is 6 images per mail.
8-3-3. Motion detected mail
The received mail will be displayed in a motion picture
form.
