background image

www.ventilation-system.com

6

TwinFresh Easy

Cartridge 

Generates air flow, provides 

energy regeneration and air cleaning. 

Air duct 

Plastic air duct. 

Sound-absorbing layer 

Serves for sound attenuation of outdoor noise. 

External grille / Outer hood 

Prevents ingress of water and foreign objects 

into the ventilator. The outer hood is not 

included in the delivery set. 

Internal round/square ventilation grille 

Equipped with manually actuated louvre shutters.

Filter 

Cleans the air flowing through 

the ventilator of dust and for

-

eign objects. Prevents contami

-

nation of the regenerator.

Fan 

Generates air flow.

Regenerator

Provides extract air energy re

-

generation for warming up of 

supply air flow.

DESIGN AND OPERATING LOGIC 

The ventilator consists of decorative protecting internal grille, a cartridge, an air duct with a sound absorbing material and a protecting 

external ventilation grille.  

Cartridge is the basic functioning part of the ventilator. 

The cartridge consists of a fan, a regenerator and two filters that ensure rough air filtration and prevent ingress of dust and foreign 

objects into the regenerator and the fan. 

The internal grille is equipped with manually actuated shutters to close the air duct during the ventilator standstill.

The ventilation hood on the outer wall prevents ingress of water and foreign objects into the ventilator. 

Cartridge is a block consisting of removable 

filters and a solid fan-regenerator unit. 

The filters are easy removable for technical 

maintenance.

VENTILATOR DESIGN 

CARTRIDGE DESIGN 

V127EN-01.indd   6

29.03.2016   9:56:06

Summary of Contents for TwinFresh Easy RL-50-7





















Reviews: